Formal Report (Part C) Instructions
Due Date: Week 12
Length: 3000 words (excludes Summary, References and Appendices)
Writing a formal report is the important, final step of completing a major project. The report needs to follow the Technology Report Guideline of Ontario Association of Certified Engineering Technicians and Technologists (OACETT, 2017). The purpose of the Technology Report is to demonstrate the candidate’s technical problem solving abilities; specifically, students must demonstrate their abilities to:
• Identify and define a technical problem
• Describe the problem accurately and in detail
• Logically apply a technical methodology to attempt to solve the problem
• Describe the results through the use of technology fundamentals, designs, data analysis and other appropriate techniques
• Draw conclusions about the results
• Make recommendations, if applicable
The final report must demonstrate a level of engineering technology or applied science knowledge and application equal to that required of an Engineering Technologist. The candidate must also demonstrate the ability to present information and ideas in an integrated, cohesive document.
The Technology Report will be evaluated in three areas:
A. Report Structure
B. Content Quality
The Technology Report must communicate information in a standard, comprehensible way following acceptable structure, style, and format. The following components should be included in the Technology Report:
1. Title Page
The title should be descriptive of the work completed, but also concise (typically less than 10 words). In some cases, the technical report may include an appropriate title for the project. The title page should also include the date, the names of the team members who contributed to the report (if applicable), the class/project section, student identification number and the name of the Professor to whom the report is being submitted.
2. Declaration of Authorship
The candidate must clearly indicate which parts of the overall Technology Report he or she completed and which were completed by other members of the group, the college and program name for which the report was completed and the date of submission to the college. The Declaration of Sole Authorship, worded as follows:
I, ___________________________ confirm that this breakdown of authorship
represents my contribution to the work submitted for assessment and my
contribution is my own work and is expressed in my own words. Any uses made
within the Technology Report of the works of any other author, separate to the work
group, in any form (ideas, equations, figures, texts, tables, programs), are properly
acknowledged at the point of use. A list of the references used is included.
All sources of information must be acknowledged in the Technology Report. Plagiarism is unethical and will result in a grade of zero. Suspected cases of plagiarism will be addressed as described in the Centennial College Academic Honesty and Plagiarism policy.
3. Abstract (or Executive Summary)
The abstract should provide a synopsis (approximately 75 to 100 words ) of what is contained in the report. This should include a description of the project design (why and how), the data presented, and the main conclusions drawn from the data. When you write a technical report or paper, the abstract is an invaluable tool to those who might subsequently be interested in its contents (i.e. professors, instructors, managers, senior vice-presidents, colleagues, etc.). The abstract allows someone to quickly assess whether or not it is critical to read your entire report, (i.e. is it important that they read the report, and if so, should they read it immediately?).
4. Table of Contents
5. List of Illustrations
The introduction should explain the importance and objectives of the design, and provide a rationale for the method used. For a design project, explain (in introductory terms) the intended application and the engineering principles applied to the design. For experiments, explain (in introductory terms) the physical or other principles that the experiment will illuminate or demonstrate. Follow this with a simple description of the experiment chosen (or assigned in most cases). The introduction should also place the design in context. You can provide this context by researching secondary sources on related theories and/or engineering principles, and paraphrasing the information in your own words with citations. You can provide further context by briefly describing any experimental methods that others have used to illuminate or test the same physical principles.
7. Design Section (if applicable)
Some projects have a significant design component. For example, a design lab might ask you to design and build a circuit to perform analog to digital conversion on an audio signal. For these types of design projects, a separate section can be used to outline the design methodology.
Plagiarism Free Papers
All our papers are original and written from scratch. We will email you a plagiarism report alongside your completed paper once done.
All papers are submitted ahead of time. We do this to allow you time to point out any area you would need revision on, and help you for free.
A title page preceeds all your paper content. Here, you put all your personal information and this we give out for free.
Without a reference/bibliography page, any academic paper is incomplete and doesnt qualify for grading. We also offer this for free.
Originality & Security
At Homework Sharks, we take confidentiality seriously and all your personal information is stored safely and do not share it with third parties for any reasons whatsoever. Our work is original and we send plagiarism reports alongside every paper.
24/7 Customer Support
Our agents are online 24/7. Feel free to contact us through email or talk to our live agents.
Try it now!
How it works?
Follow these simple steps to get your paper done
Place your order
Fill in the order form and provide all details of your assignment.
Proceed with the payment
Choose the payment system that suits you most.
Receive the final file
Once your paper is ready, we will email it to you.
We work around the clock to see best customer experience.
Our prces are pocket friendly and you can do partial payments. When that is not enough, we have a free enquiry service.
Admission help & Client-Writer Contact
When you need to elaborate something further to your writer, we provide that button.
We take deadlines seriously and our papers are submitted ahead of time. We are happy to assist you in case of any adjustments needed.
Your feedback, good or bad is of great concern to us and we take it very seriously. We are, therefore, constantly adjusting our policies to ensure best customer/writer experience.